S&A air cooled chiller for 120W diode laser

September 16, 2020

A customer intended to purchase air cooled chiller to cool 120W diode laser, the technical requirement as below:

1. Required cooling capacity in 0.8 kW at 20 °C target water temperature

and 40 °C ambient temperature

2. Adjustable working temperature from 5 °C to 40 °C

3. Operating ambient temperature from 5 °C to 40 °C

4. Glycol mixing ratio in 15%

5. Require 16 l/min flow rate @ 2.5 bar operating pressure

To satisfy both the cooling capacity and water pressure, we recommend S&A chiller CW-6000 with 3KW cooling capacity and ±0.5℃ temperature accuracy.

CW-6000 technical parameter: http://Products/ChillerCW60003000Wco.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:

Website: http://

The above is the S&A air cooled chiller for 120W diode laser we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Quantum dot light-emitting diode was a major breakthrough

Next:Capacitor diode boost circuit diagram Daquan (six capacitor diode boost circuit design schematic diagram detailed)

Most Popular

Thyristor

555 thyristor fast tester circuit

Semiconductor Device Failure Analysis - Semiconductor Device Chip Soldering Tips and Control

Kaai develops continuous wave green laser diode

lastest New

Global Sources Indonesia Show (Electronics and Lifestyle)

YZPST IGBT modules;YZPST FUSE;YZPST THYRISTOR Applications

Full-digital IGBT IF induction power supply

Operators who keep their word and promise

Send Inquiry